Specifications Page 13 – Environment Page 14 – Section 6: Don’t show me this message again. Using the Scale 3. Verify all cables within the scale are down flush and will not contact the platform. Comments to this Manuals Your Name. If the corners are still not within one 1 division of each other, identify the corner s with the error and replace the load cell in that corner. Corner Test Section 6:
|Date Added:||19 May 2012|
|File Size:||68.6 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Press the [ZERO] key to zero the scale.
Fairbanks SCB-RU Ultegra Bench Scale User Manual | 16 pages
Page 17 Section fajrbanks IF you are using a remote display, check the main display first, if it’s OK then check the cable and plug connection on the remote First unplug, then plug in the AC adapter to reset the program. Parts Page 23 Page 24 – Appendix I: Because the scale uses special low-power circuitry, no warm-up time is required.
Page 4 Section 8: Page 15 Section 6: Calibration Procedures -8, -7, -6, -5, -4, -3, -2, -1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 The breakdown of the zones are as follows: Screw in all 4 feet, set upright and re-level Page 11 Section 4: All equipment should be protected from direct sunlight. Using the Scale 3. Weight readings will be accurate as soon as the unit is powered on and set to zero.
Page 2 Every effort has been made to provide complete and accurate information in this manual. Repair and Parts Replacement Don’t show me this message again.
Page of 29 Go. Specifications Page 13 – Environment Page 14 – Section 6: Computer Connections Section 2: To print the scb-r99000 completely, please, download it.
Got it, continue to print. When the unit is powered, the liquid crystal display LCD will show the software part number and the revision followed by either “0. It uses default Windows drivers and is installed automatically upon first connection with a PC.
Fairbanks Ultegra SCB-R9000-14U Service Manual
Sealing The Scale Section 6: Comments to this Manuals Your Name. By pressing ‘print’ button you will print only current page.
Page 23 Section 8: Verify no weight is on the platform. Zone Latitude degrees Reference City If the corners are not within one 1 division of each other, conduct a good visual inspection to verify that there are fairbanms binds or interference with the platform and re test the scale. Display Assembly Replacement Section 7: The breakdown of the zones are as follows: A low power USB device draws less than mA.
General Information Page 6 – Section 2: Using the level bubble, adjust one or two feet minimally to level the platform.
Customer Care Page 11 Page 12 – Section 5: Scale will display “”, when power is turned on and weight is present.